The item is available for pick-up at Tondo Music, Viale Stazione 1, 6817, Maroggia
To order this item please fill the request form below or call 0779679919
The Rega RX-FIVE loudspeaker system delivers balance, detail, and dynamics thanks to a unique handmade set of three Rega designed drivers and crossover. The newly developed DX-125 bass mid-range driver (using a doped paper cone) is at the heart of the RX range and combines perfectly with the Rega ZRR high frequency and RR7.8 bass unit. These custom units are mounted in a newly designed cabinet enclosure constructed from 18mm MDF and covered in a choice of three beautiful real wood veneers. The RX-FIVE will integrate perfectly into any home and deliver exceptional performance and musicality with smooth and accurate bass response.
Available in three stunning real wood veneers Walnut, Cherry, and Black Ash.
The RX-FIVE’s are a medium sized floorstanding loudspeaker with a dedicated side firing bass driver. Bass response and imaging can be tuned by adjusting the distance of the speaker from the rear and sidewalls. As with all loudspeakers, this will be dependant on the size of room, flooring, and furnishings, therefore some simple experiments trying different distances will help optimize the performance to your surroundings. If the bass becomes ‘boomy’, you can position the side firing speakers inwards to supress any unwanted bass responses.
Cabinet Construction 18mm MDF Real wood veneer
Cabinet Design Band pass enclosure
Dimensions (cm) H x W x D 83.5 x 18.2 x 34.2
Weight (each) 16.6Kg
Reflex Port Front ported
Impedance Nominal 6 ohms
Power Handling 110w per channel *
High Frequency unit Rega ZRR
Mid /bass driver (Doped cone) Rega DX-125
Side Bass Driver Rega RR 7.8
*Power handling figures are quoted as a guide. Amplification between
30w and 500w can be safely used depending on the quality of amplification.
To ensure adequate clearance and prevent damage to the front facia, the grille magnets
must locate directly onto the drive unit fixing bolts.